Jump to content

A7SII Viewfinder/Monitor "Auto" stopped working

cotton

By cotton,
in Sony Alpha Full Frame Cameras

 Share

Recommended Posts

cotton Apprentice

cotton

Posted
Posted

When my display settings are set to "Auto" yet the "Auto" doesn't seem to be working at all. Visuals stay in the Viewfinder unless I switch to "Monitor (Manual)" in which case the monitor works. I've cleaned the viewfinder, but to no avail.

 

I saw one other thread on this, but it didn't really elaborate on anything. Anyone else have this issue? If so, were you able to fix without sending to Sony? Thanks in advance.

Link to post
Share on other sites
adwb Proficient

adwb

Posted
Posted

Carefully remove the rubber eyecup on the view finder, you will see a tiny "window" above the view finder, this is the sensor and if it has dirt on it it thinks it's your eye that's stopping the light.

Take a cotton bud or something small and soft and clean the little window

Link to post
Share on other sites
  • 4 weeks later...
  • 2 years later...
suren Newbie

suren

Posted
Posted

Thanks adwb, such a great solution for which sony support asked me to reset , update firmware and then if nothing happened got for repair and i checked for near by centre but then just checked forum and such a easy but very important solution. Thanks a lot my camera works fine now. 

Link to post
Share on other sites
  • 2 months later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Posts

    • XKAES
      2 Primes or 1 Zoom?

      By XKAES · Posted

      I'd opt for a small zoom, but I must admit that there seems to be a dearth of lenses in the e-mount in the 24-50mm range -- for some reason.  I have a small 24-70mm, but that's an a-mount Tamron.  Maybe you can find something by looking at lenses slightly longer.  I have a heavy, but small 24-100mm a-mount, and Tokina made a 24-200mm a-mount.  Maybe there are similar lenses in the e-mount.  Kill three birds with one stone.
    • bs.shoots
      2 Primes or 1 Zoom?

      By bs.shoots · Posted

      I recently got an a7cii and to pair with the compact body, I thought of getting 2 of the trio compact lenses, 24mm F2.8 and 40mm F4.0. (I already have a 70-200mm) However I stumbled upon the newly released 24-50mm F2.8 G. I'm not sure which to get - I like the small factor of the prime lenses ON the body because it's discreet and helps me blend in as an average tourist / doesn't make it obvious when doing street. But if I add the dimensions of the 2 primes together, it takes up more space in the bag than the zoom lens. BUT THEN, the weight of the 2 prime lenses is 110g lesser than the zoom lens. The zoom lens has the added benefit of being more versatile.   So now I'm stumped. Each has their pros and cons and I can't decide which to get. I'd like to hear the views of you guys who are more experts at this.   Edit: I'm a bit concerned about weight because the last time I went overseas my shoulders were aching from carrying too much. Which is why I was looking for small compact primes in the first place.
    • dev001
      Sony a6300 after shutter repair

      By dev001 · Posted

      Hi, I have got a6300 which shutter stopped working. I managed to change shutter but unfortunatelly broke shutter motor tape but I fixed that. After repair the shutter is working but not in a proper way, watch with sound. I bought the second shutter and tried to test it before dissaembling again and it doesn't react to magnet but it works fine when I apply 3V. Are there different type of shutter for a6000 - a6400? Back to the question what is wrong with my shutter after first repair? I don't want to put next shutter unfoundedly. Do your sony cameras perform such a self-check after start up?  IMG_5579 (1).webm

  • Topics

×
×
  • Create New...