Jump to content

Help please - Panorama shoot mode setting

WindriderAU

By WindriderAU,
in Sony Alpha Full Frame Cameras

 Share

Recommended Posts

WindriderAU Newbie

WindriderAU

Posted
Posted

Hi Team,

 

This may sound like a dumb question.

 

I am using an A7RII with firmware upgrade to 2.0.

 

Prior to the upgrade I did a panorama shot that I used shoot mode (individual shots then stiched together using Lightroom).

 

When I tried to do the same thing today, I could only do a panorama shot using sweep mode.

 

Can someone please tell me how to get back to shoot mode?

 

Thanks

 

Steve

Link to post
Share on other sites
Waldhaus3 Rookie

Waldhaus3

Posted
Posted

To the best of my knowledge there are no Sony cameras that automatically take a series of RAW images that you can later stitch together in Lightroom or a similar program. The panorama mode on the dial is for the jpeg sweep panoramas. To do the more involved panorama using multiple files stitched together on your computer you need to take multiple frames one at a time, overlapping the appropriate amount, and controlling the exposure so as not to get funny looking skies etc.

That will produce the best results, but the jpeg sweep panorama can still produce very good results depending on what you plant to do with the panorama.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Posts

    • michelb
      A7 R5 flash settings

      By michelb · Posted

      Camera should be set to forced flash even if you intend to use it off camera since the Godox system does not require to place the body in the WL position
    • Alan J
      A7 R5 flash settings

      By Alan J · Posted

      Godox off camera
    • jonheres
      Sony ZV-E10 II – Continuous Autofocus Speed and Sensitivity

      By jonheres · Posted

      Problem Description – Sony ZV-E10 II A few weeks ago, I purchased my Sony ZV-E10 II camera from Digital Photo Supply. The unit is updated to the latest available firmware and is showing an abnormal behavior in the continuous autofocus system (AF-C), which can be consistently reproduced under different conditions and with various native Sony lenses. Observed Symptoms The parameters for focus transition speed (AF Transition Speed) and subject shift sensitivity (AF Subject Shift Sensitivity) do not remain stable. When the camera encounters a point or surface with low texture or contrast and takes time to focus, instead of maintaining smooth “focus breathing” according to the settings, it makes a sudden jump to focus. From that moment, autofocus behaves as if the speed were set to the highest value, completely ignoring the configured settings. After a few seconds, or when reframing, the system resumes normal operation. This phenomenon occurs even with Active Stabilization, Face/Eye AF, and Touch Tracking turned off. Testing Methodology Tests were conducted under various lighting conditions, both high-contrast and flat light. Different subjects were positioned at varying depth distances but laterally aligned (scenarios with partially overlapping elements). Medium and low focus transition speeds and medium or low subject sensitivity settings were used—these are the cinematic parameters I normally work with. All tests were performed exclusively with native Sony lenses, varying light and contrast levels to check behavioral consistency. Under these conditions, the camera consistently showed instances where, when using Spot Focus (S/M/L), it would momentarily lose focus and, upon regaining it, start focusing instantly on any new subject as the camera moved—completely ignoring the configured transition speeds. Control Camera Used A Sony ZV-E10 (Mark I) was used as a reference with identical lenses, settings, subjects, and lighting conditions. It passed all tests successfully without reproducing the issue. Impact on Professional Use This malfunction is catastrophic for my professional video work, where precise and fluid focus transitions are critical. When the system ignores transition speed and sensitivity settings, the footage becomes unusable, directly affecting visual continuity and cinematic quality. If this behavior cannot be corrected, the camera is unsuitable for professional video use, as it compromises focus system stability and predictability.

  • Topics

×
×
  • Create New...