Jump to content

Recommended Posts

A new snart remote camera app is available: version 3.10 replaces Version 3.00. There is a new feature: Change the autofocus mode.

 

Unfortunately it does not work correctly on my Alpha 6000 (new firmware 1.10):

 

If I choose e.g. AF-C, this is displayed on the screen. But if I set the focus point on my smart phone (Galaxy S3), the focus mode changes to DMF and the menu entry for changing the focus mode disappears. After a certain time or after pressing half the trigger button on the camera, the correct focus mode is displayed. Setting now the focus, the loop starts again (DMF is set).

 

Sony is really not a software company. [emoji19]

Link to post
Share on other sites

I'll take a guess and that selecting AF-C doesn't give you the touch focus ability. It seems no different than not being able to use AF-C when choosing center or other focus areas.

AF-C was just an example, the same is true if I choose AF-S. And I can also reproduce it with both, center and wide focus area.

I have not found any setting where the focus mode is NOT set to DMF after touching the screen for focus.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Posts

    • I've been using this lens extensively without any sharpness issues. At long focal lengths, you'll have to factor in the need for a faster shutter speed (< 1/500-ish at 350mm) and other factors like atmospheric distortion, fog/dust haze, etc. All these factors contribute to a deterioration of image quality at longer focal lengths.
    • That's supposed to be a pretty good APS-C lens. Can you try it on a different camera just for the heck of it? Friend? Camera shop? The lens is noted for sharpness, so if you're having as much trouble as you say, you may want to look into a replacement or repair. 
    • Hi everyone, I’m reaching out to the community because I’m facing a persistent image quality issue with my Sony 70–350mm f/4.5–6.3 G OSS lens, and I’d like to know if this is normal behavior or if my copy is defective. Problem description: I’ve extensively compared the 70–350mm G OSS with my Sony 18–135mm f/3.5–5.6 OSS, using a Sony A6700, under controlled conditions: • Identical lighting and background • Same subject and position (LEGO figure, consistent framing) • Tripod or steady support • Manual focus or AF with center point • Same shutter speed (e.g., 1/200s), similar ISO (ISO 4000–6400), RAW + JPEG • OIS turned on (and also tested with OIS off) My observations: • At 135mm, the 70–350mm G OSS delivers softer, flatter images than the 18–135mm, even when stopped down. • At 350mm, the sharpness drops significantly – the center is soft, and textures (like LEGO tiles or fabric) appear blurred or smudged. • Contrast and micro-detail are noticeably inferior across all focal lengths. • The 18–135mm at 135mm (even cropped) retains better edge sharpness and detail definition. • Both JPEG and RAW files confirm the issue – this is not just JPEG processing or noise reduction. Question to the community: • Have others experienced similar softness with the 70–350mm? • Is it possible I have a decentered or optically misaligned copy? • Is there a known issue with OSS introducing softness at long focal lengths? I wanted to love this lens due to the range and portability, but currently it’s unusable for anything where image quality matters. I’m considering returning or sending it for service. Thanks in advance for any feedback or comparison results you can share.  
  • Topics

×
×
  • Create New...