Jump to content

A7iii Bracketing Question

Andrew W
 Share

Recommended Posts

Andrew W Newbie

Andrew W

Posted
Posted

Hello All,

I shoot a lot of bracketed long exposures and when doing so the rear LCD only turns off during the first exposure of the brackets, is there any way to control this so that the LCD will be off during all of the exposures?

Also, during the brackets there will sometimes be a little blinking green light in the lower left of the LCD which is the indicator that the camera is still capturing the bracketed photos. However, there have been a few times that this light has disappeared before the brackets have completed which is extremely frustrating because then I have no way to tell if the brackets have completed so I end up moving the camera and messing up the group of images.

Thank you !!!

Link to post
Share on other sites
Andrew W Newbie

Andrew W

Posted
  • Author
Posted

Thank you for your response LiveShots .... 

I have one of my custom buttons set in the way that you suggested, which I do like, but it unfortunately it does not solve the bracketing issue ... please let me know if you think of anything else...Thanks again 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Posts

    • Pieter
      Centre Focus on A7R3

      By Pieter · Posted

      I'd use Focus Area: (Expand) Flexible Spot: S instead of Center. Smaller focus area and more control over where to focus. https://helpguide.sony.net/ilc/1710/v1/en/contents/TP0001653124.html
    • vinniemac
      Custom white balance for studio flash.

      By vinniemac · Posted

      New Sony user here, trying to get my head around all of the differences from Fuji 😬  I’ve figured out most of the settings, but can’t find any answers on how to do a custom white balance for studio flash. The custom setting option only seems to be based on measuring ambient light. The only workaround I can think of is to set an approximate kelvin value and then shoot a grey card and fix it in post, but I’d much prefer to get it right in camera.    camera is an A7CR TIA Vinnie 
    • tadwil
      Sony Alpha 7 III - What type of filter? What do you recomme

      By tadwil · Posted

      I am not sure what effect you are trying to achieve regarding the bluish cast of the water.  Do you want to neutralize it or enhance it?  It would be best if you Google polarizer filter for camera and look at the images and videos and see if you can find the desired effect that seem to mirror your situation.  If you can't find the effect you are looking for, it may not be possible to do so with the Polarizer.  I use the polarizer to minimize the shimmering reflections in the water that would look distracting in the image. Neutral density filters are used to reduce the amount of light coming into the camera.  If you want to shoot a small waterfall and you want to create an angel veil effect by reducing the shutter speed to seconds but the light conditions won't allow you to do so, you can use neutral density filters to shoot at very slow shutter speeds. Neutral density and polarizing filters can get very expensive.  If your lenses share a common filter size, that would be great.  If not, get the filters for the largest filter diameter lens and get a set of stepping rings to use with your smaller filter diameter lenses.

  • Topics

×
×
  • Create New...