Jump to content

Issue with Picture Pofile, when using saved Photo-Mode (1 2 M1 M2 M3 M4)

Jörg
 Share

Recommended Posts

Jörg Apprentice

Jörg

Posted
Posted

Hello together,

I have trouble with changing colour phase, ect., when i'm working with a saved Mode like 1, 2, M1-M4 with my Sony a6500.

With default modes like P, S, A, Auto, M.. there is no problem, changing settings on the used picture-profile, e.g. PP1, will fully work.

But when I'm working with an saved mode, e.g. M1, it seems as if all settings of the picture-profiles, which change color, like color-phase, color depth, are not doing any difference, when changing between picture-profiles. Only contrast, gamma and stuff like this changes.

If you than go into the settings of a picture-profile, sometimes the settings are zero, even if they are not zero when working in default photo-modes (M, P, A, S, Auto,...). Maybe it's even the default settings of the picture profile that are shown there. I'm not sure.

If you than change the setting, e.g. color phase, numbers will change, but nothing happens. The color is not changing.

If you change the photo-mode to e.g. manual the change of the picture-profile-setting is not taken over.

Going Back to M1, there a again only the default? settings.

 

Because I'm using picture-profile and saved photo modes very often, this issue accur very often in my daily use.

Can anyone reproduce the issue. Any suggestions to solve it.

 

Greetings

Jörg

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Posts

    • Pieter
      Centre Focus on A7R3

      By Pieter · Posted

      I'd use Focus Area: (Expand) Flexible Spot: S instead of Center. Smaller focus area and more control over where to focus. https://helpguide.sony.net/ilc/1710/v1/en/contents/TP0001653124.html
    • vinniemac
      Custom white balance for studio flash.

      By vinniemac · Posted

      New Sony user here, trying to get my head around all of the differences from Fuji 😬  I’ve figured out most of the settings, but can’t find any answers on how to do a custom white balance for studio flash. The custom setting option only seems to be based on measuring ambient light. The only workaround I can think of is to set an approximate kelvin value and then shoot a grey card and fix it in post, but I’d much prefer to get it right in camera.    camera is an A7CR TIA Vinnie 
    • tadwil
      Sony Alpha 7 III - What type of filter? What do you recomme

      By tadwil · Posted

      I am not sure what effect you are trying to achieve regarding the bluish cast of the water.  Do you want to neutralize it or enhance it?  It would be best if you Google polarizer filter for camera and look at the images and videos and see if you can find the desired effect that seem to mirror your situation.  If you can't find the effect you are looking for, it may not be possible to do so with the Polarizer.  I use the polarizer to minimize the shimmering reflections in the water that would look distracting in the image. Neutral density filters are used to reduce the amount of light coming into the camera.  If you want to shoot a small waterfall and you want to create an angel veil effect by reducing the shutter speed to seconds but the light conditions won't allow you to do so, you can use neutral density filters to shoot at very slow shutter speeds. Neutral density and polarizing filters can get very expensive.  If your lenses share a common filter size, that would be great.  If not, get the filters for the largest filter diameter lens and get a set of stepping rings to use with your smaller filter diameter lenses.

  • Topics

×
×
  • Create New...