Jump to content

Unable to install firmware v4 on A7rII


Recommended Posts

I am on my fourth try at installing firmware v4 on my A7rII

 

 

- Using a Mac with OS X 10.11.6

 

 

- Following all instructions - no memory card, battery at 100%, USB set to Mass Storage

 

 

- at initial stage in installer of "Connect the camera and computer" I soon get the message on the camera screen "check the connected device" - this is after it confirms that Mass Storage is on

 

 

- I wait a bit and nothing more happens (should I be more patient) then the installer software says "Could not find the camera for this update" and tells me to shut down, start again

 

 

- I have rebooted the machine and only have the Finder open when doing this

 

 

The only info I could find on the Sony site talked about installing a 'DriverLoader.app' for newer versions of Mac OS X. I downloaded that and think I installed it, but it provides no feedback to that effect

 

Has anyone had this and figured out a workaround? I could not find anything on the Forum.

 

Many Thanks

Link to post
Share on other sites

I am on my fourth try at installing firmware v4 on my A7rII

 

 

- Using a Mac with OS X 10.11.6

 

 

- Following all instructions - no memory card, battery at 100%, USB set to Mass Storage

 

 

- at initial stage in installer of "Connect the camera and computer" I soon get the message on the camera screen "check the connected device" - this is after it confirms that Mass Storage is on

 

 

- I wait a bit and nothing more happens (should I be more patient) then the installer software says "Could not find the camera for this update" and tells me to shut down, start again

 

 

- I have rebooted the machine and only have the Finder open when doing this

 

 

The only info I could find on the Sony site talked about installing a 'DriverLoader.app' for newer versions of Mac OS X. I downloaded that and think I installed it, but it provides no feedback to that effect

 

Has anyone had this and figured out a workaround? I could not find anything on the Forum.

 

Many Thanks

Just a thought have you tried another cable?

Link to post
Share on other sites

jayteepix -

 

I believe that does the trick. I had originally tried a different cable to begin with and ran into an issue - not sure now what that was - but that original cable is now doing the job.

 

I actually did the update using my wife's Windows laptop just now, but violating the scientific method I changed two variables and used that original cable as well as different OS. That worked and now I tried it up to the Connection step (where it got hung up earlier) on my iMac and it is working here now as well.

 

Sony does say to use only the cable that comes with the camera but that first glitch led me to try another one.

 

Thanks

Link to post
Share on other sites

Had the same problem on my Mac, figuring a cable is a cable is a cable. Apparently there's something magical about the SONY cable. My problem now it's mixed in with all the other cables around here and will have to ferret it out next time an update comes along.

Link to post
Share on other sites

My SONY cables all have a 'B' marked on the end:

 

Welcome, dear visitor! As registered member you'd see an image here…

Simply register for free here – We are always happy to welcome new members!

 

 

 

 

Link to post
Share on other sites

jayteepix -I believe that does the trick. I had originally tried a different cable to begin with and ran into an issue - not sure now what that was - but that original cable is now doing the job.I actually did the update using my wife's Windows laptop just now, but violating the scientific method I changed two variables and used that original cable as well as different OS. That worked and now I tried it up to the Connection step (where it got hung up earlier) on my iMac and it is working here now as well. Sony does say to use only the cable that comes with the camera but that first glitch led me to try another one.Thanks

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Posts

    • I recently got an a7cii and to pair with the compact body, I thought of getting 2 of the trio compact lenses, 24mm F2.8 and 40mm F4.0. (I already have a 70-200mm) However I stumbled upon the newly released 24-50mm F2.8 G. I'm not sure which to get - I like the small factor of the prime lenses ON the body because it's discreet and helps me blend in as an average tourist / doesn't make it obvious when doing street. But if I add the dimensions of the 2 primes together, it takes up more space in the bag than the zoom lens. BUT THEN, the weight of the 2 prime lenses is 110g lesser than the zoom lens. The zoom lens has the added benefit of being more versatile.   So now I'm stumped. Each has their pros and cons and I can't decide which to get. I'd like to hear the views of you guys who are more experts at this.   Edit: I'm a bit concerned about weight because the last time I went overseas my shoulders were aching from carrying too much. Which is why I was looking for small compact primes in the first place.
    • Hi, I have got a6300 which shutter stopped working. I managed to change shutter but unfortunatelly broke shutter motor tape but I fixed that. After repair the shutter is working but not in a proper way, watch with sound. I bought the second shutter and tried to test it before dissaembling again and it doesn't react to magnet but it works fine when I apply 3V. Are there different type of shutter for a6000 - a6400? Back to the question what is wrong with my shutter after first repair? I don't want to put next shutter unfoundedly. Do your sony cameras perform such a self-check after start up?  IMG_5579 (1).webm
    • PRIVATE\M4ROOT\CLIP I had the same issue Couldnt find the videos  even thought it played on the camera  found them all in here   
  • Topics

×
×
  • Create New...