Jump to content

Cleaning water spots off lenses


Recommended Posts

I have a number of lenses for my a550 but I get a number of water spots when shooting with my el cheapo Sony SAL1855. I think I have narrowed it down to that lens but have tried cleaning the front of the lens and both sides of the clear filter and the spots seem to continue. I'm afraid to clean the inner part of the lens and wouldn't know how to clean inside the camera on the mirror or whatever. Any suggestions.

Link to post
Share on other sites

Guest Jaf-Photo

So, the spots show in the pictures? The it's most likely dust (or specks) on the sensor or rear element of the lens. Try a rubber blower first but if that doesn't help, wet cleaning is the next step. There are good sensor cleaning kits with swabs and liquid available in camera stores or online.

Link to post
Share on other sites

  • 1 year later...

I've got a bit of a sensor cleaning problem.

I've used a wet cleaning kit several times aready but there are some areas of dirt clearly encrusted on the surface of the sensor. They always show up in images with apertures of around f11 or smaller.

Do you have any thoughts on getting rid of them?

Link to post
Share on other sites

  • 3 weeks later...
Guest Jaf-Photo

Sensor cleaning in camera stores differs depending on who does it. Sometimes, they are no better than you and take less care.

 

It's not difficult to do as long as you think through the process before you start.

 

It's true hat the better advice is to avoid dirtying the sensor but accidents do happen. If you have a set of swabs and liquid, you can fix the problem in five minutes.

 

Do check the back of your lens OP. Spots on the rear element are more visible in the pictures than spots on the front element.

Link to post
Share on other sites

I would not like to clean the mirror myself other than with air. It has

a risk to scratch or other problems. You would better sent it to Nikon.

     

I doubt that Nikon would clean a Sony, but ... fear not !  

The a550 is not only not a Nikon, it is also not an SLT.

It has some weird live view features, but it is basically

just a regular flip-mirror SLR.   

   

The mirror is the SAFEST thing you can clean in your 

SLR body. Lenses are fairly safe but, like sensors, they 

are involved in forming your images. The mirror in an 

SLR does NOT form your images, and sometimes has

a few "scratches" engineered right into it. Not actually 

careless scratches, but mirrors have historically had a 

variety of grooves, grids, etc built into them that would 

really mess up your images if the mirror were involved  

in forming your images. 

   

If you put a minor scratch on a mirror it's diddley squat.   

   

The REAL danger in cleaning a mirror is that if you use 

too much force, you may misalign it, and your focus will

be inaccurate.   

   

OTOH, just as scratches on the mirror are meaningless 

so also is any minor dirt, so there's seldom any reason  

to clean an SLR mirror.   

    

---------------------------------------------------------------------   

    

OTOOH if you have a Sony SLT mirror, that is a waaay 

different kettle of fish. Verrrry risky ! An SLT mirror IS

in the image forming path. 

   

  

 

    

  

`

Link to post
Share on other sites

  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Posts

    • I recently got an a7cii and to pair with the compact body, I thought of getting 2 of the trio compact lenses, 24mm F2.8 and 40mm F4.0. (I already have a 70-200mm) However I stumbled upon the newly released 24-50mm F2.8 G. I'm not sure which to get - I like the small factor of the prime lenses ON the body because it's discreet and helps me blend in as an average tourist / doesn't make it obvious when doing street. But if I add the dimensions of the 2 primes together, it takes up more space in the bag than the zoom lens. BUT THEN, the weight of the 2 prime lenses is 110g lesser than the zoom lens. The zoom lens has the added benefit of being more versatile.   So now I'm stumped. Each has their pros and cons and I can't decide which to get. I'd like to hear the views of you guys who are more experts at this.   Edit: I'm a bit concerned about weight because the last time I went overseas my shoulders were aching from carrying too much. Which is why I was looking for small compact primes in the first place.
    • Hi, I have got a6300 which shutter stopped working. I managed to change shutter but unfortunatelly broke shutter motor tape but I fixed that. After repair the shutter is working but not in a proper way, watch with sound. I bought the second shutter and tried to test it before dissaembling again and it doesn't react to magnet but it works fine when I apply 3V. Are there different type of shutter for a6000 - a6400? Back to the question what is wrong with my shutter after first repair? I don't want to put next shutter unfoundedly. Do your sony cameras perform such a self-check after start up?  IMG_5579 (1).webm
    • PRIVATE\M4ROOT\CLIP I had the same issue Couldnt find the videos  even thought it played on the camera  found them all in here   
  • Topics

×
×
  • Create New...