-
Posts
-
I am not sure what effect you are trying to achieve regarding the bluish cast of the water. Do you want to neutralize it or enhance it? It would be best if you Google polarizer filter for camera and look at the images and videos and see if you can find the desired effect that seem to mirror your situation. If you can't find the effect you are looking for, it may not be possible to do so with the Polarizer. I use the polarizer to minimize the shimmering reflections in the water that would look distracting in the image. Neutral density filters are used to reduce the amount of light coming into the camera. If you want to shoot a small waterfall and you want to create an angel veil effect by reducing the shutter speed to seconds but the light conditions won't allow you to do so, you can use neutral density filters to shoot at very slow shutter speeds. Neutral density and polarizing filters can get very expensive. If your lenses share a common filter size, that would be great. If not, get the filters for the largest filter diameter lens and get a set of stepping rings to use with your smaller filter diameter lenses. -
Advice needed on best use/settings - on full zoom using 200-600mm to capture a single, static bird at distance, the center focus area seems too large and will frequently focus on a point around or behind the bird such as branches or reeds etc. leaving the bird unclear. Is there a way to reduce the size of the center focus or should I be using a different setting? Advice appreciated - I'm still very much learning. -
-
-
Topics
-
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now