Jump to content
pobinr

A7III batteries going flat

Recommended Posts

Hello

A couple of months ago I bought an A7III & batteries & going flat without me using it. Initially I thought it might be a quality issue with the Watson free extra battery that came with it. But the Sony battery also does the same. Loses about 20% charge a day with camera switched off.  Any ideas?

 thanks

Share this post


Link to post
Share on other sites

That, is news to me.

  I have an A9 and  Bossie Bessie  has the A 7 R III,  and we do not have a problem at all.

Ok our batteries are all  Sony originals, charged in the Sony original charger.

Bossy uses her  A 7 R III on a daily basis,  I,m more of a  weekly person, but the batteries are huge, compared to the  A 7 II,   where yes we were changing batteries daily.

Please get back to us, and explain in detail....  

How many days, are you talking about,    between charges , and your  usage,  since you say the battery goes   flat  ?

Edited by Wally The Confused

Share this post


Link to post
Share on other sites

There may be a slight drain on the battery for internal functions like clock, etc?  However I don't lose anything like 20% a day without use.  I would contact Sony support and see if this is a recognized problem.  

Share this post


Link to post
Share on other sites

At present I'm not using it. Just turning it on once a day for a few seconds to check charge level & it's dropping about 15% a day !
Will let you know how I get on with B&H or Sony. I guess to establish whether it's the batts or the camera at fault, I need to see if they go flat when not in the camera.

Edited by pobinr

Share this post


Link to post
Share on other sites

I'm reading on other forums people find Fotodiox Canon lens adapter flattens their battery. So I'm going to see if batt OK with lens removed. Then if not by actually removing adapter. 

Share this post


Link to post
Share on other sites
6 hours ago, pobinr said:

I'm reading on other forums people find Fotodiox Canon lens adapter flattens their battery. So I'm going to see if batt OK with lens removed. Then if not by actually removing adapter. 

That's interesting...an adapter draining the camera?  I would just remove the adapter first and see if your camera goes "flat".  Do you have a native lens to mount and test too?

Share this post


Link to post
Share on other sites

With adapter still in place, the batt no longer goes flat when canon lens removed. It was my f2.8 70-20mm Canon lens with x 2 adapter.  
I'm going to see if it's only a problem with that lens & x2 & try other lenses I have. Don't have any native ones. 

Edited by pobinr

Share this post


Link to post
Share on other sites

Ah, Ok, you have stacked up, a couple of things there !

I have no Idea.......

Take things off, one at a time, then see what happens.

  I have not used any kind of interactive adapter.

The only adapter I know about, is the... non autofocus, non interactive ...adapter, that fits my old minolta lens to  , the  A 9.

  It has no electrical connexions  at all,  therefore, no power loss.

Hope this helps.

 

 

 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×