Jump to content

Two features and two lens updates to A6xxx


Recommended Posts

We'd all like a no-compromise camera that does everything but in the real world there are limits due to the laws of physics and company budgets. So I was thinking that when suggesting updates to the A6xxx series to limit the features to two which are achievable this year and two lenses that would sell. Note that these are what would be good for me and you of course might have a different pair of features/lens in mind. Also, I've been wondering why the A7 series gets mark 2 etc naming and whether it might be helpful for the A6xxx series to use the same and have two models, the A6000m2 and the A6500m2 (skipping the middle A6300) where the A6000m2 is light-weight and lower spec while the A6500m2 is weather sealed and higher spec (e.g. IBIS). 

 

So the two new features for each, firstly A6000m2:

- same sensor and chip set as A6500

- screen that flips round for selfies

 

For A6500m2:

- customisable wheel at front of hand grip

- screen that flips round for selfies

 

These are all doable in an incremental update

 

For the lenses as I see it one advantage of the A6xxx series is to have a fully featured camera in a smaller size & weight body, so putting FE lenses on sort-of misses the point. I do rather groan every time I see another FE lens announcement. For me the two would be APSC E-mount lenses:

- 16-50 F2.8

- something long, e.g. 70-300, a bit like the current 55-210 extended by a factor of 1.5. Aperture less of an issue than resolution, weight and speed of focus, e.g. for wildlife when in remote places where don't want massive camera bag

 

What would your two features and lenses be?

 

 

Link to post
Share on other sites

2 features:

 

1.More useful set of ports under the left side cover. 

 

2.Change the panoram from sweep mode to multi- 

frame mode, but the camera still does the stitching. 

This is prolly just firmware thing. 

   

 

2 lenses:  

 

Any 2 that occupy the range between el-cheapo 

and primo. Sony seems to offer almost nada in the 

middle ground. They concentrate on "price point" 

stuff and "prestige" stuff .... neither of which serve 

the real-world needs of the great majority of users. 

Howbout they change the meaning of "GM" [if that  

even HAS a meaning ...] to mean "Great Majority" ?   

   

No denying Sony has a few offerings in the middle

ground, yet no denying it's sadly neglected territory.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Posts

    • I'd use Focus Area: (Expand) Flexible Spot: S instead of Center. Smaller focus area and more control over where to focus. https://helpguide.sony.net/ilc/1710/v1/en/contents/TP0001653124.html
    • New Sony user here, trying to get my head around all of the differences from Fuji 😬  I’ve figured out most of the settings, but can’t find any answers on how to do a custom white balance for studio flash. The custom setting option only seems to be based on measuring ambient light. The only workaround I can think of is to set an approximate kelvin value and then shoot a grey card and fix it in post, but I’d much prefer to get it right in camera.    camera is an A7CR TIA Vinnie 
    • I am not sure what effect you are trying to achieve regarding the bluish cast of the water.  Do you want to neutralize it or enhance it?  It would be best if you Google polarizer filter for camera and look at the images and videos and see if you can find the desired effect that seem to mirror your situation.  If you can't find the effect you are looking for, it may not be possible to do so with the Polarizer.  I use the polarizer to minimize the shimmering reflections in the water that would look distracting in the image. Neutral density filters are used to reduce the amount of light coming into the camera.  If you want to shoot a small waterfall and you want to create an angel veil effect by reducing the shutter speed to seconds but the light conditions won't allow you to do so, you can use neutral density filters to shoot at very slow shutter speeds. Neutral density and polarizing filters can get very expensive.  If your lenses share a common filter size, that would be great.  If not, get the filters for the largest filter diameter lens and get a set of stepping rings to use with your smaller filter diameter lenses.
  • Topics

×
×
  • Create New...