Jump to content

Password to accesspoint stuck at five "stars"

Alpha0006
 Share

Recommended Posts

Alpha0006 Newbie

Alpha0006

Posted
Posted

I am trying to get my Sony a6000 to connect to my iphone or to a wifi. But when typing in my passwords and press continue there is only five letter in the passwordbox no matter what Password I write. I tries resetting network and SSID but it doesn't help. I took out the battery and put it back after half an hour. Same thing. How will I get the passwordbox to accept what I am writing there?

Link to post
Share on other sites
jojjomete Newbie

jojjomete

Posted
Posted

Try to perform factory reset.To reset the camera to factory settings, locate the RESET button on the camera. Use a pointed object  to press and hold the RESET button for 2-3 seconds and then release. If none of the option work, you have to result to opening the camera to fix the problem. The toggle switch may be the issue. In that case, refer to Sony a6000 Manual to open the case of the camera and fix the toggle switch. May be this fix your stuck issue. 

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Posts

    • Pieter
      Centre Focus on A7R3

      By Pieter · Posted

      I'd use Focus Area: (Expand) Flexible Spot: S instead of Center. Smaller focus area and more control over where to focus. https://helpguide.sony.net/ilc/1710/v1/en/contents/TP0001653124.html
    • vinniemac
      Custom white balance for studio flash.

      By vinniemac · Posted

      New Sony user here, trying to get my head around all of the differences from Fuji 😬  I’ve figured out most of the settings, but can’t find any answers on how to do a custom white balance for studio flash. The custom setting option only seems to be based on measuring ambient light. The only workaround I can think of is to set an approximate kelvin value and then shoot a grey card and fix it in post, but I’d much prefer to get it right in camera.    camera is an A7CR TIA Vinnie 
    • tadwil
      Sony Alpha 7 III - What type of filter? What do you recomme

      By tadwil · Posted

      I am not sure what effect you are trying to achieve regarding the bluish cast of the water.  Do you want to neutralize it or enhance it?  It would be best if you Google polarizer filter for camera and look at the images and videos and see if you can find the desired effect that seem to mirror your situation.  If you can't find the effect you are looking for, it may not be possible to do so with the Polarizer.  I use the polarizer to minimize the shimmering reflections in the water that would look distracting in the image. Neutral density filters are used to reduce the amount of light coming into the camera.  If you want to shoot a small waterfall and you want to create an angel veil effect by reducing the shutter speed to seconds but the light conditions won't allow you to do so, you can use neutral density filters to shoot at very slow shutter speeds. Neutral density and polarizing filters can get very expensive.  If your lenses share a common filter size, that would be great.  If not, get the filters for the largest filter diameter lens and get a set of stepping rings to use with your smaller filter diameter lenses.

  • Topics

×
×
  • Create New...