Jump to content

A6300 slow / delay issue


Recommended Posts

Hi everyone!

 

I've had the A6300 now since September, switching from Canon 70D. Something I have really experienced is how slow it is. Starting up takes several seconds and switching from my custom modes or to other modes, like manual to shutter priority seems quite slow. I've noticed it's slower after filming a lot so I guess that has to do with the buffer but it's still surprisingly slow, even when I haven't filmed and switching.

 

Is this just how it is, a bit slower because of all Sony stuffed in it or how are your experiences? Also, sometimes with like focusing or waking up from sleep mode if I haven't used it for more than 10 seconds seem a bit slow too. It's like the "brain" can't keep up.

 

Thanks for all help and advice!

Link to post
Share on other sites

  • 2 months later...

I have the very same problem.

My (very new, 3 weeks old) Sony a6300 takes 3-4 seconds to turn on and about 1.5 seconds to turn off! 

When the camera was in EVF mode when shut down (I cancelled the EVF/LCD auto-switching), turning it on again starts the LCD monitor, and after some time switches back to the EVF...

I have firmware version 1.10

 

3-4 seconds startup time is completely unacceptable! Sony must do something about it because many shots are going to get lost.

Link to post
Share on other sites

  • 2 years later...

I found the a6300 to be slow as well. All the previous comments are problems I have had. Also, I have problems with the lcd screen. When I flip it out it flashes the screen the goes black. Sometimes it works properly but during a photo shoot it is unreliable. 

I also find the processing slow after taking a photo. If I am in direct sunlight it’ll over heat and start to malfunction. Then sometimes since i Shoot jpeg + raw if it’s in that state of malfunction it’ll only save jpeg photos.

my firmware is up to date too.

Link to post
Share on other sites

About once a month shutting down will take longer because the camera will take a black image to map hot pixels on the sensor. You'll know by hearing the shutter sound after a while when turning the camera off. This is completely normal.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

×
×
  • Create New...