Jump to content

Panning with an A7Sii


Recommended Posts

Hi all,

I'm a newbie to the forum and a newbie to video. I have bought a Sony A7Sii; which I use for a new business venture videoing properties.

 

I mainly use sliders but occasionally pan. It's the panning I'm having problems with. Some pans can be almost 180 degrees. Almost all the pans I have done are slightly jerky when viewed back. I use a manfrotto fluid head on a sturdy tripod, so the equipment is not the issue.

 

I'm in the UK, so I'm using 25 fps and a shutter speed of 1/50th of a second. My lens is a Sony/Zeiss 16-35mm lens set to 16mm.

 

I've read on the web that a pan should take 23 seconds, to scan 90 degrees. That would mean a 40 second plus scan for anything approaching 180 degrees. Even for a 90 degree pan, a clip of 23 seconds is far too long to be usable in a property video. People would get bored or even lose the will to live. Through research I've found that the general rule of thumb with clips in property videos is they should not be any longer than 5 seconds.

 

How can I get round the issue of trying to squeeze a very slow pan that takes 20+ seconds into a clip of only 5 seconds? Or am I just going to have to accept that pans will be slightly juddery.

 

Could I increase the frame rate to say 60 and the shutter speed to 1/120th when panning very slowly and then speed the video up in post production? Or will that change in frame rate in itself introduce juddering. I render at 25fps mp4 (PAL).

 

I use Power Director 14 Ultimate Suite for video editing; which I know is not as good as Adobe Premier, but does have a function to adjust the speed of a clip.

 

Any advice would be most welcome. As I say, I'm new to video.

 

thanks in advance.

John

Link to post
Share on other sites

Maybe just shoot 30fps if possible. I could be wrong here but I think the judder will be there with any fast pans. If you watch the old movies shot in 24 you can still see the judder. They found a way around this by directing movement to distract your eye from the judder with those fast pans.

Link to post
Share on other sites

If you select the main directions you'd like to shoot (eg 4 in a square room to show each wall) you can speed up the pan (in post - eg x8) from one angle to the next. Not necessarily points for artistic merit but it avoids the judder whilst maintaining the sense of space the viewer needs to know what they are looking at. Also saves time so you can use the full 5s looking at each wall/view.

 

Not done it myself so it might be truly hideous... test it and see what you think!

 

You might also try a 360 degree shutter (1/25th if you shoot at 25fps). This will introduce blur but will reduce judder.

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share

  • Posts

    • I recently got an a7cii and to pair with the compact body, I thought of getting 2 of the trio compact lenses, 24mm F2.8 and 40mm F4.0. (I already have a 70-200mm) However I stumbled upon the newly released 24-50mm F2.8 G. I'm not sure which to get - I like the small factor of the prime lenses ON the body because it's discreet and helps me blend in as an average tourist / doesn't make it obvious when doing street. But if I add the dimensions of the 2 primes together, it takes up more space in the bag than the zoom lens. BUT THEN, the weight of the 2 prime lenses is 110g lesser than the zoom lens. The zoom lens has the added benefit of being more versatile.   So now I'm stumped. Each has their pros and cons and I can't decide which to get. I'd like to hear the views of you guys who are more experts at this.   Edit: I'm a bit concerned about weight because the last time I went overseas my shoulders were aching from carrying too much. Which is why I was looking for small compact primes in the first place.
    • Hi, I have got a6300 which shutter stopped working. I managed to change shutter but unfortunatelly broke shutter motor tape but I fixed that. After repair the shutter is working but not in a proper way, watch with sound. I bought the second shutter and tried to test it before dissaembling again and it doesn't react to magnet but it works fine when I apply 3V. Are there different type of shutter for a6000 - a6400? Back to the question what is wrong with my shutter after first repair? I don't want to put next shutter unfoundedly. Do your sony cameras perform such a self-check after start up?  IMG_5579 (1).webm
    • PRIVATE\M4ROOT\CLIP I had the same issue Couldnt find the videos  even thought it played on the camera  found them all in here   
  • Topics

×
×
  • Create New...